厂家分析热风炉初次使用应注意哪些问题?

时间:2019年04月26日信息来源:热风炉厂家 点击: 收藏此文 【字体:

热风炉作为取暖设备,它的使用也是具有周期性的。每年寒冷的季节就是这种设备充分发挥其性能的时候,寒意一去它将转入休眠状态。那么我们在每年开始使用的时候应该注意些什么呢? 1.在每一次休眠过后第一次使用的时候,我们都应该对燃烧室以及净化室等高温区域进行耐高温防护措施,主要是耐火砖与耐火泥。在初次使用时,炉膛的温度不宜上升过高过快,以免耐火材料的表面出现裂纹甚至发生崩裂的情况。
Hot blast stove as heating equipment, its use is also periodic. Every year in the cold season, when the equipment is fully functional, it will go to sleep when the chill goes away. So what should we pay attention to when we start using it every year? 1. When we use it for the first time after each dormancy, we should take high temperature protection measures for high temperature areas such as combustion chamber and purification chamber, mainly refractory bricks and refractory mud. In the initial use, the furnace temperature should not rise too high or too fast to avoid cracks or even cracks on the surface of refractories.
2.在用煤方面,第一次使用和已经使用过一段时间的炉是有区别的。第一次使用^好使用一些质量较好的煤。不但是为了提高煤燃烧的效率,更重要的是需要选择合适的环亚app。经过计算,我们发现粒径在50-60mm的煤炭在环亚app热风炉中燃烧^佳。对常见的固定炉箅热风炉来说,各类烟煤、无烟煤以及褐煤都是可用的。
2. In the use of coal, there is a difference between the first furnace and the one that has been used for some time. The first time to use ^ good use of some better quality coal. Not only to improve the efficiency of coal combustion, more importantly, it is necessary to select the appropriate coal. After calculation, we found that coal with a particle size of 50-60 mm burns well in a coal-fired hot blast stove. For common fixed grate hot blast stoves, bituminous coal, anthracite and lignite are available.
3 .对烟筒的处理,长时间不使用,烟筒很可能会出现一些对于烟气的处理问题。一般易度推荐的是湿法脱硫方法,这也是行业的主流方法。此外,对于烟气除尘方法我们采用的水膜除尘器。
3. When the chimney is not used for a long time, there may be some problems in the treatment of flue gas. Generally speaking, wet desulfurization is recommended, which is also the mainstream method in the industry. In addition, for the flue gas dedusting method, we use the water film deduster. 
(作者:热风炉 编辑:admin)
文章热词:热风炉

上一篇:煤粉热风炉与燃油燃气热风炉构造的区别

下一篇:没有了

产品展示:

热门文章

推荐文章